315Mhz Universal Wireless Remote Control receiver for fixed code and Rolling Code Receiver rc transmitter and receiver
Tax included.
Product Description Input Power AC 85V-250V Output voltage Decided By the COM PIN INPUT Standby Current <8.5MA RF Frequency 315M RF working mode superheterodyne Receive sensitivity > 97 dbm Transmitting...
Product Description
| Input Power | AC 85V-250V |
| Output voltage | Decided By the COM PIN INPUT |
| Standby Current | <8.5MA |
| RF Frequency | 315M |
| RF working mode | superheterodyne |
| Receive sensitivity | > 97 dbm |
| Transmitting distance | 20 -50 meters indoor, 50-100 meters in open space |
| Decoding mode | MCU software decoding |
| Learnable Transmitters | 1-20 transmitters |
| Support remote type | Learning code (1527) |
| Switching Modes | Both Momentary & Toggle |
| Wiring type | fixed terminal |
| Switch Output | normally open & normally closed |
| Dimension of PCB | (L,W,H) 35*30*18mm |
Please Note: the Receiver Switch Module part number CHJ-C25 have 2 ways of working mode.The OUTPUT signal have 2 Voltage Level. It decided by the INPUT of the COM pin.
OUTPUT mode 1:
Connect the COM to the Power Supply by AC 85-250V, the Output pin will create AC 85-250V Signal. Please check below diagram for better understanding.
OUTPUT mode 2:
Connect the COM pin with any other Additional Power Supply,the output will create the same Voltage signal as the Additional Power Supply. it can be Direct Current or Alternating Current. Decided by the Additional Power Supply.
BUT, Please note: the additional Power Supply should be in the range of the Receiver Switch Module-(DC5-12V, AC 85-250V).
Please check below diagram for better understanding
IMPORTANT INFORMATIONS:
You can match the Remote Control with the Receiver SwitchModule (CHJ-C25) in 2 mode.
